Determine the resultant internal loadings in the beam at cross sections through points D and E. Point E is
just to the right of the 3-kip load.
Free Body Diagram:
Support Reactions:
Equations of Equilibrium @ D
Equation of Equilibrium @ E
Sample problems and notes are based on the following textbook: Mechanics of Materials 8th Edition
ISBN-13: 978-0136022305
ISBN-10: 0136022308
Edition: 7
Author: Russell C. Hibbeler
Published Date: 2010
How useful was this post?
Click on a star to rate it!
Average rating 5 / 5. Vote count: 1
No votes so far! Be the first to rate this post.
We are sorry that this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?
Determine the resultant internal loadings acting on the cross section through points C and D of the beam in Prob. 1–13. From Point C: From Point D: Sample problems and notes are based on the following text book: Mechanics of Materials 8th Edition ISBN-13: 978-0136022305 ISBN-10: 0136022308 Edition: 7 Author: Russell C. Hibbeler Published Date: 2010 How…
Objective To find and familiarize the stresses in the truss due to an externally applied load, and to see how geometry affects to stresses in the truss. Finally, the last goal of this experiment was to become familiar with strain gauge measurements. Known & Assumptions: Materials: The materials required: The triangular trusses Tinius Olsen Testing…
What is the importance of beams? The primary function of beams, regardless of the application, is to act as structural elements that transfer loads. In the civil engineering field, beams refer to horizontal elements which symmetrical sections, such as an i-beam. For example, in a building, beams support the weight of a building’s floors above, ceilings,…
What is an example of torsion force? An example of a torsional force would be anytime a force acting on an object results in a twisted or rotating motion. This twisting movement happens when an applied torque or force encounters an opposing force which generates shear strain. This opposing force could be a result of…
Determine the resultant internal loadings on the cross section through point D. Assume the reactions at the supports A and B are vertical. Referring to the FBD of the entire beam Referring to the FBD of this segment Sample problems and notes are based on the following text book: Mechanics of Materials 8th Edition ISBN-13: 978-0136022305…
Consider the sketch of the movable crane. Make a free-body diagram of the mobile crane. The wheels are 4 ft apart and the center of gravity is halfway between the wheels. Assume the ballast is an external force acting one foot behind the left axle and that the weight hanging off the crane at point…