A spherical interplanetary probe of 0.5m diameter contains electronics that dissipate 150 W. If the probe surface has an emissivity of 0.8 and it does not receive radiation from other surfaces, such as the sun, what is its surface temperature of the probe?

An array of 10 silicon chips, each of length L=10 mm on a side, is insulated on one surface and cooled on the opposite surface by atmospheric air in parallel flow with T∞​=24°C and u∞​=40m/s. When in use, the same electrical power is dissipated in each chip, maintaining a uniform heat flux over the entire cooled surface….

Abstract The purpose of this lab was to determine the thermal conductivity k of the disk material by measuring the temperature distribution for transient and steady-state heat conduction in a cylindrical wall. To conduct this experiment cooling water was pumped though the HT10X Heat Transfer service Unit at approximately 1.5 liters/min. Initially the heating power…

All sample problems and notes are based on the following textbook: Fundamentals of Heat and Mass Transfer Seventh Edition ISBN-13: 9780470501979 ISBN-10: 0470501979 Edition: 7 Author: Theodore L. Bergman, Adrienne S. Lavine, Frank P. Incropera, David P. DeWitt Publication date: 2011 Publisher: Wiley Format: Hardcover 1072 pages How useful was this post? Click on a star to rate it! Submit Rating Average rating 0 /…

What is the thickness required of a masonry wall having thermal conductivity 0.75 W/m K if the heat rate is to be 80% of the heat rate through a composite structural wall having a thermal conductivity of 0.25 W/m K and a thickness of 100 mm? Both walls are subjected to the same surface temperature…

The 5-mm-thick bottom of a 200-mm-diameter pan may be made from aluminum (k = 240 W/m·K.) or copper (k = 390 W/m·K.). When used to boil water, the surface of the bottom exposed to the water is nominally at 110 °C. If heat is transferred from the stove to the pan at a rate of…