Mechanics of Materials 8th Edition Problem – 1.10

ByEngineeringCheatSheet.com October 8, 2022November 9, 2022

The boom DF of the jib crane and the column DE have a uniform weight of 50 lb/ft. If the hoist and load weigh 300 lb, determine the resultant internal loadings in the crane on cross sections through points A, B, and C.

Equations of Equilibrium: For point A

Equations of Equilibrium: For point B

Equations of Equilibrium: For point C

Sample problems and notes are based on the following text book: Mechanics of Materials 8th Edition

ISBN-13: 978-0136022305

ISBN-10: 0136022308

Edition: 7

Author: Russell C. Hibbeler

Published Date: 2010

Energy vs Power

ByEngineeringCheatSheet.com February 20, 2024April 4, 2024

What’s the difference between energy vs power? In the realm of physics and engineering, the concepts of energy and power are fundamental but often misunderstood. While they are closely related, they represent distinct aspects of physical systems. Energy is the ability to do work, while power is the rate at which work is done or…

Materials | Strength of Materials

What is a Charpy impact test?

ByEngineeringCheatSheet.com January 9, 2022April 6, 2024

The Charpy impact test, also commonly referred to as the Charpy V-notch test by material scientists, serves as a standardized high-strain rate examination to quantify the energy absorbed by a material upon fracture. The absorbed energy functions as an indicator of the material’s notch toughness. Widely employed in various industries, this test is favored for…

Statics | Strength of Materials

Mechanics of Materials 8th Edition Problem – 1.9

ByEngineeringCheatSheet.com October 8, 2022February 28, 2023

Determine the resultant internal loadings on the cross section through point D. Assume the reactions at the supports A and B are vertical. Referring to the FBD of the entire beam Referring to the FBD of this segment Sample problems and notes are based on the following text book: Mechanics of Materials 8th Edition ISBN-13: 978-0136022305…

Automotive Structure Design | Chassis Design | Strength of Materials

The Science of Fatigue Stress in Engineering: Key Considerations for Design and Testing

ByEngineeringCheatSheet.com March 27, 2023March 30, 2023

What is fatigue stress in engineering? So, what exactly is fatigue stress? Basically, it’s when a component or structure starts to weaken and break down over time due to cyclical stress or loading. Even if the stresses put on the component are within acceptable limits, fatigue failure can still occur due to the frequency of…

Statics | Strength of Materials

Mechanics of Materials 8th Edition Problem – 1.8

ByEngineeringCheatSheet.com October 7, 2022November 9, 2022

Determine the resultant internal loadings on the cross section through point C. Assume the reactions at the supports A and B are vertical. Sample problems and notes are based on the following textbook: Mechanics of Materials 8th Edition ISBN-13: 978-0136022305 ISBN-10: 0136022308 Edition: 7 Author: Russell C. Hibbeler Published Date: 2010 How useful was this post? Click…

Materials | Strength of Materials

Understanding Combined Axial Loading and Bending: How They Impact Structural Design

ByEngineeringCheatSheet.com March 10, 2023March 30, 2023

What is a combined loading? The objective of combined loading is to evaluate the stresses of a structural member when exposed to a variety of loads. Basically, these are forces that act on a structure in different ways, and understanding how they interact is crucial for creating buildings, bridges, automotive chassis and internal combustion engines….

Similar Posts